INVID-IPEXTOUT2 Invid Tech Outdoor Waterproof Gigabit PoE Extender

Specifications

• Model - INVID-IPEXTOUT2
• No. of channel - 1(PoE IN) into 2(PoE OUT) 328 Feet, Each Direction
• Pass Through Data Rate - 10/100/1000 Mbps half/full duplex
• Power over Ethernet input - Pin Assignment and Polarity: Both 1/2 , 3/6 and 4/5,7/8
• Power over Ethernet Output - Pin Assignment and Polarity: 1/2 (+), 3/6 (-) Output Power: up to 25W for 2PSE
• Connector - Shielded RJ-45, EIA 568A and 568B
• Network cable - Shielded category 5 (or higher)
• Dimension - 9.1 x 3.5 x 1.6 in (230mm x 90mm x 40mm)
• Mounting - Wall of shelf
• Environment - Indoor or outdoor
• Environmental Condition
  • Operating Ambient Temperature - -13°F ~ 131°F(-25°C to 55°C)
  • Operating Humidity - Complies with IP66 (Support outdoor rain prevention,need outdoor waterproof UTP cable)
  • Storage Temperature - -22°F ~ 158°F (-30°C to 70°C)

Regulatory Compliance

• IEEE 802.3af (15.4W)
• IEEE 802.3at (30W) (Requires PoE + or INVID-IPEXTOUTLR2)
• IEEE 802.3at 4Pairs(60W) (Requires PoE ++ or INVID-IPEXTOUTLR2)

PoE Source

• PoE+ switch (802.3at,Output voltages 50V) - 60W mid-span (802.3at,Output voltages 54V)

Maximum Distance

• 656 ft (200m)
• 984 ft (300m)

INVID-IPEXTOUT2 Specifications PDF