MDR-60-12 KBC Networks 60W Din Rail Power Supply for 12VDC Input Industrial IP Devices

The MDR-60 series power supply units are for use with various KBC transmission products. They are designed for use in a wide range of operating temperatures in non-environmentally conditioned, industrial applications. The units provide 60W at Vdc.

Specifications

Output

• DC Voltage - 48V
• Rated Current - 1.25A
• Current Range -0~1.25A
• Rated Power - 60W
• Ripple & Noise (max)(1) - 200mVp-p
• Voltage Adj. Range - 48~56V
• Voltage Tolerance(2) - ±1.0%
• Line Regulation - ±1.0%
• Load Regulation - ±1.0%
• Setup, Rise Time - 500ms, 30ms/230Vac, 500ms, 30ms/115Vac at full load
• Hold Up Time - 50ms / 230Vac 20ms / 115Vac at full load

Input

• Voltage Range(3) - 85~264Vac 120~370Vdc
• Frequency Range - 47 ~ 63 Hz
• Efficiency (typ) - 87%
• AC Current (typ) - 1.8A/115Vac 1A/230Vac
• Inrush Current (typ) - Cold start 30A/115Vac 60A/230Vac
• Leakage Current - <1mA/240Vac

Protection

• Overload - 105 ~ 150% rated output power Protection type: Constant current limiting, recovers automatically after fault condition is removed
• Over Voltage - 57.6~64.8V Protection type: shut down output voltage, re-power on to recover

Function

• DC ok active signal - Relay contact rating (max): 30V / 1A resistive

Mechanical

• Dimensions (WxHxD) - 40mm x 90mm x 100mm (1.57” x 3.54” x 3.94”)

Environmental

• Operating Temperature(4) - -20°~ +70°C /-4°~ 158°F
• Operating Humidity - 20 to 95% RH non-condensing
• Storage Temperature - -40°~ +85°C / -40°~ 185°F
• Temp Coefficient Vibration - ±0.03%/°C(0 ~ 50°C), Component: 10 ~ 500Hz, 2G 10min/1cycle, 60 min each along X, Y Z axes, Mounting compliance to IEC60068-2-6
• Mean Time Between Failure (MBTF) - 299 200 hours min MIL-HDBK-217F (25°C)

Approvals

• Safety - UL508, UL60950-1, TUV EN60950-1 approved
• EMC Emmission - EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,3
• EMC Immunity - EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A

Safety

• Withstand Voltage - I/P-O/P:3kVac I/P-F/G:2kVac O/P-F/G:0.5kVac
• Isolation Resistance - I/P-O/P, I/P-FG, O/P-FG >100MΩ / 500Vdc / 25°C / 70% RH

MDR-60-12 Specifications PDF