KBF-DGP Keri Systems North American Double Gang Electrical Mounting Plate

Keri’s B100-SKP-SA Readers provide reliable swipe- Fingerprint reading in attractive and unobtrusive packages. Typically for small and medium installations, these readers can be used in residential areas, homes, offices, gate automations and other applications where high security is needed but simple installation is required. B100-SKP-SA Readers have one integrated relay so you can connect the readers directly to activate devices such as electric locking, alarm systems, etc. For higher security and additional relay needed, the readers could be linked via RS485 to our RU2 din-rail two-remote relays unit in a secured area. The readers can be programmed in a few steps via the Fingerprint sensor via the keypad, running through a simple programming menu provided.

Specifications

• Sizes - 3.9” x 3.7” x 1.2” (100mm x 95mm x 30mm)
• Weight - 1.1lb (.491 kg)
• Material - Molded Aluminum
• Color - Silver
• Output - 1 integrated relay (2A /24V AC/DC)
• Connection Method - 1 integrated relay or RS485 if connected to RTT (1 relay 2A /24V AC/DC) and if connected to RU2 (2 relays 3A/230VAC; 3A/24V AC/DC)
• Programming - Via Finger templates and/or via keypad with menu provided – depending on models
• Capacity - 100 Fingerprints (98 + 2 admin) / 98 codes
• Sensor Type - Capacitive swipe
• 1:1000 Read Time - 970 msec
• Supported Card Technologies - Keri NXT and HID 125 KHz, MIFARE Classic/Plus/Ultralight, DESFire EM or AWID available upon request
• Power Requirements - +9-14VDC @ 120mA
• Indicators - Red Green Amber LED, beeper and small programming LED
• IP Rating - IP-65 (outdoor use with required covers)
• Operating Temperature - 5ºF to 122ºF (-15ºC to + 50ºC)

KBF-DGP Specifications PDF