500755 Muxlab Audio/RS232/IR over IP Tranceiver with PoE

The AUDIO/ RS232 over IP PoE Transceiverallows2CHaudio signals to be extended up to 330ft (100m) via Cat5e/6 cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is supported by connecting several Transceivers to the same local Ethernet network. The device supports PoE (PD) if used with a PoE (PSE) Ethernet Switch, and both RS232 and IR transmissionfor remote control of end devices. The Transceiver can be configured as a Transmitter or Receiver

Specifications

• Environment - 2CH Analog Audio
• Devices - 2CHaudio equipment, amplifiers, powered speakers, PA systems, AV cameras and players
• Transmission - Transparent to the user
• Bandwidth - 20Hz to 20KHz
• Signals
  • 2CH analog audio ( in or out )
  • SPDIF Out (2CHdigital audio)
• Connectors
  • One (1) RCA receptacle for SPDIF out
  • One (1) 3.5mm jack for analog audio (in or out)
  • One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair
  • One (1) 3.5mm jack for IR Emitter or IR Sensor
  • One (1) DB9 Serial Port for RS232
  • Four (4) DIP Switches for device ID addressing and Transmitter/Receiver setting
• Maximum Distance (Excluding 3.5mm cable length) - Cat5e/6 : 330ft (100m)
• Latency - 30ms
• Network Requirement - 100BaseT for Point to Point; 1000 BaseT for other configuration
• IR Frequency - 38KHz to 56KHz
• RJ45 Pin Configuration (Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring)
  • RJ45 Link
  • Pin 1 (R)
  • Pin 2 (T)
  • Pin 3 (R)
  • Pin 4 (R)
  • Pin 5 (T)
  • Pin 6 (T)
  • Pin 7 (R)
  • Pin 8 (T)
• Cable - One (1) Cat 5e/6 or better twisted pair cables required
• Power Source - This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately
• PoE Standard - IEEE 802.3af
• Power Consumption
  • Transmitter : 2.9W
  • Receiver : 1.8W
• Temperature
  • Operating : 0° to 40°C
  • Storage : -20° to 85°C
  • Humidity : Up to 95% non-condensing
• Dimensions - 3.70” x 3.68” x 0.97” (94 x 93.5 x 24.6 mm)
• Weight - 1.1 lbs(0.5kg)
• Compliance
  • Regulatory : FCC, CE, RoHS
  • Flammability : 94V0
• Warranty - 2 years
• Order Information - 500755 AUDIO / RS232 over IP PoE Extender (incl : one Transceiver)(UPC: 627699007556)
• Accessories
  • 500905 3-Port Rackmount Transceiver Chassis
  • 50092016-Port Rackmount Transceiver Chassis
  • 500917 Wall Mount Transceiver Bracket Kit
  • 500998 IR Emitter, and 500994 IR Sensor
  • 500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade

500755 Specifications PDF

500755 Manual